Marineline |  Hobart
  • Home
  • BSP Screwed Fittings
    • Stainless Steel Fittings & Joiners >
      • 316 Stainless Steel Marine Fittings
      • ​316 Stainless BSP Threaded Fittings
    • Brass Fittings >
      • Brass Hosetail Fittings (BSP) and Horsetail Joiners
      • Brass Threaded Fittings
    • Nylon Fittings Glass Reinforced, BSP Thread
    • Pipe Compression Fittings
    • Skin Fittings & Deck Fillers
  • Hoses
    • Marine Plumbing Hose & Fittings
    • PVC Hose
    • Rubber Hose
    • Stripwound Hose (Stainless Steel & Galvanised)
  • Valves
    • Aqua Valves
    • Ball Valves
    • Butterfly Valves
    • Gate Valves
    • Globe Valves
  • Griffin Filters
  • Mako Impellers
  • Seaflo Pumps
    • Bilge Pumps
    • Livewell Pumps
    • Water Pressure Systems / Deckwash Pumps & Kits
    • Shower/Drain Bilge Pumps
    • ​DC Flexible Impeller & Gear Pumps
    • Water Pressure System / Deckwash Pumps Accessories
  • Clamps
  • Sovereign BBQ's
    • Sovereign BBQ Models
    • BBQ Accessories & Mounting Options
  • Mako Sea Strainers
  • Scoops
  • Contact Us
    • About Us
    • Contact Us
    • Your Privacy
Hobart: (03) 6272 6463
​Mobile: 0477 777 675

Furling Accessories

Picture
Carbo Furling Lead Block Assemblies
Harken recommends equipping every system with Carbo lead blocks for safe furling from the cockpit. The 7404 kit’s lightweight, UV-stabilized Carbo blocks run exclusively on ball bearings for fast trimming under any load. 

A 7402 ratchet maintains tension when spooling so the unit furls smoothly and easily. The 7403 outboard assembly allows the furling line to travel outboard of the stanchion to keep the sidedeck clear. Block mounts with a strong four-screw clamp without removing the stanchion or lifelines. Use the 7401 or 7407 block on the bow pulpit as an inboard lead. Use the 7405 as an inboard lead for two lines, for continuous line furlers, or cutter-rigged boats with two furlers. 7401, 7402, 7405, and 7407 have ball-and-socket bases to align blocks for smooth leads aft. The 7404 lead block kit provides a complete system for most boats. 

Stanchion Mount Bases
The 061 and 7408 bases for Carbo and Classic blocks lead furling line inside the stanchion. 

Halyard Restrainers
A halyard restrainer keeps the halyard against the mast. This provides a better angle to the halyard swivel and prevents it from wrapping around the foil. 

Stainless steel brackets feature hardcoat-anodized aluminum sheaves that accommodate both wire and rope. 

Halyard Deflector  
A halyard deflector prevents the jib halyard and other halyards (such as a spinnaker or additional jib halyards) from wrapping around the foil. 

Prefeeders and Snap Shackles
Prefeeders and snap shackles facilitate fast sail changes. The 7006 prefeeder features hardcoat-anodized rollers with low-friction bushings.

Picture
Picture
Picture
Marineline Hobart Logo
Contact Us
About Us
Your Privacy
Marineline Distributors - 1 Lampton Avenue, Derwent Park Tasmania 7009.
Web Design by Solstice Digital